Utica Boilers UB95M-200 Installationsanweisungen

• Integrated modulating boiler control is designed for 

central heating (CH) hot water boilers with modulating 

fan and gas-air control. 

• Modulation is based upon data relayed to control by 

temperature sensors. 

• Burner uses direct spark igniter (DSI).

• Modulating boiler control is intended for use in 

combination with user interface display unit for both 

information and operation. 

• Control is designed for installation with conventional on/

off dry contact room thermostat. 

• Control is able to provide hot water and outdoor reset 

functions.

Central Heat (CH): Control uses sensors on supply water, 

return water and outside air to determine heat load of 

heating system. Results in boiler supplying just enough 

heat to satisfy demand which results in fewer overshoots 

and less short cycling than conventional boiler.
Domestic Hot Water (DHW): When used in conjunction 

with indirect hot water heater boiler has capability to 

provide domestic hot water.  An on/off dry contact aquastat 

is used to activate call for domestic hot water. 
Outdoor Reset: Control senses outside air temperature 

using factory supplied, field installed sensor. Controller 

detects presence of sensor and reacts according to 

parameters programmed into controller.

User interface display allows installer and home owner to 

scroll through control settings and customize boiler to heat 

delivery system used in installation location. See “User 

Interface Quick Reference” Section 10, page 21 for more 

information on using and programming boiler control.

IMPORTANT:
This boiler is equipped with a feature that saves energy 

by reducing the boiler water temperature as the heating 

load decreases.  This feature is equipped with an override 

which is provided primarily to permit the use of an external 

energy management system that serves the same function. 
This Override Must Not Be Used Unless At Least One Of The 

Following Conditions Is True:

• An external energy management system is installed 

that reduces the boiler water temperature as the 

heating load decreases.

• This boiler is not used for any space heating.
• This boiler is part of a modular or multiple boiler 

system having a total input of 300,000 BTU/hr or 

greater.