Telus Modem IR1200 Benutzerhandbuch
TELUS Mobility™
26
2.
The Control Panel window opens. Double-click on the Network and Dial-up Connections icon.
3.
The Network and Dial-up Connections window opens with the new iR1200 Modem icon inside.
4.
Right-click on the iR1200 Modem Connection icon and select Properties.
5.
The iR1200 Modem window opens. Select the General tab. In the Phone number box, erase the temporary phone number
previously entered and replace it with either:
previously entered and replace it with either:
•
For Packet Data enter: s=2
•
For Circuit Switched Cellular enter: the ISP phone number
6.
Click OK.
Modem Configuration – Windows XP
Install the Modem
1.
Go to Startà Settingsà Control Panel and click on the Phone and Modem options.
2.
The Phone and Modem Options window opens. Click the Modems tab.
3.
The Modems window opens. Click Add.
4.
The Install New Modem window opens. Check the Don't detect my modem; I will select if from a list box then
click Next.
click Next.
5.
The Driver Selection window opens. Under Manufacturer, select (Standard Modem Types). Under Models, click
Standard 19200 bps Modem. Click Next.
Standard 19200 bps Modem. Click Next.
6.
The Port Selection window opens. Highlight the COM port that you will be using to connect to your modem (i.e.,
COM1, COM2, COM3, etc.). Click Next.
COM1, COM2, COM3, etc.). Click Next.
7.
The modem installation is finished. The “Your modem has been set up successfully” window appears.
8.
The Phone and Modem Options window opens. Click OK to continue.
9.
The Digital Signature Not Found window opens. Click Yes to proceed.
10. The Modem Installation Finish window opens. Click Finish.
11. The Modems window reappears with the newly added Standard 19200 bps modem displayed in the dialog box. Click
OK.
Create and Configure a Dial-up Networking Connection
1.
From the computer’s desktop, double-click the My Computer icon. Then, double-click the Control Panel icon.
2.
The Control Panel window opens. Double-click on the Network Connections icon.
3.
The Network Connections window opens. Double-click on Create a New Connection.
4.
The New Connections Wizard window opens. Click Next to continue.
5.
Select Connect to the Internet and click Next.
6.
Select Set up my connection manually and click Next.
7.
Select Connect using a dial-up modem and click Next.
8.
Click in the box next to the Standard 19200 bps modem that was added previously. A check mark will be added.
Remove the check mark next to all other modems listed and click Next.
Remove the check mark next to all other modems listed and click Next.
9.
The Connection Name window opens. Enter a name for the connection such as “iDEN Modem Connection” and click
Next.
Next.