Telus Modem IR1200 Benutzerhandbuch
iR1200 Modem
29
Header Compression [AT+ws182]
This command enables or disables TCP header compression options. Some DTE-side stacks (such as PPP) will negotiate
local header compression independently from this setting. To disable header compression, apply this command.
local header compression independently from this setting. To disable header compression, apply this command.
AT Command
Header Compression
Command Syntax
AT+ws182=<header compression>
AT+ws182? (?=Query parameter)
AT+ws182=? (?=Range Parameter)
AT+ws182? (?=Query parameter)
AT+ws182=? (?=Range Parameter)
Parameter Value
1
0 = over the air and local header
compression enabled.
2
1 = over the air header compression
enabled.
3
2 = Local header compression enabled
3 = header compression disabled.
Expected Return Code(s)
OK
Saving AT Settings [AT&W]
Your modem is now properly configured for use with the iDEN
network. The iR1200 modem can store up to three profile or
image. By default, image 2 is loaded when the modem is powered on. We recommend that you save this setting to the first
profile/image.
profile/image.
AT Command
Save User Default Configuration
Command Syntax
AT&W1
Expected Return Code(s)
OK
IMPORTANT: These settings are stored on the modem’s Random Access Memory (RAM) and are lost when
the modem is turned off unless stored in the modem’s non-volatile memory.