Whirlpool WFG530S0EW Installationsanweisungen

Seite von 20
12
3. Tighten lock screw.
4. Press CANCEL/OFF when finished.
Warming Drawer or Premium Storage 
Drawer
(on some models)
Remove all items from inside the warming drawer or premium 
storage drawer, and allow the range to cool completely before 
attempting to remove the drawer.
To Remove:
1. Open the warming drawer or premium storage drawer to its 
fully open position.
2. Using a flat-blade screwdriver, gently loosen the warming 
drawer or premium storage drawer from the glide alignment 
notch and lift up the drawer alignment tab from the glide.
3. Repeat Step 2 on the other side. The warming drawer or 
premium storage drawer is no longer attached to the drawer 
glides. Using both hands, pick up the warming drawer or 
premium storage drawer to complete the removal.
To Replace:
1. Align the forward drawer notches with the notches in the 
drawer glides on both sides. Place the rear alignment tabs 
into the drawer glides on both sides.
2. Push the warming drawer or premium storage drawer in all 
the way.
3. Gently open and close the warming drawer or premium 
storage drawer to ensure it is seated properly on the glides 
on both sides.
Storage Drawer
(on some models)
The storage drawer can be removed. Before removing, make sure 
drawer is cool and empty.
To Remove:
1. Pull the storage drawer straight back to the drawer stop.
2. Lift up the front of the drawer and pull the drawer out.
A. Lock screw
B. Air shutter
A. Flat-blade screwdriver
B. Drawer alignment tab
C. Drawer glide notch
A
B
A
B
C
A. Drawer alignment tab
B. Drawer glide notch
A. Drawer stop notch
A
B
A