Blomberg DHP24412W Benutzeranleitung

Seite von 28
11 / 28  EN
Dryer / User Manual
9. Attach the two remaining power cord outer 
conductors to the 2 terminals labeled L. Tighten 
both screws so that the power conductors are 
securely held in place. 
10. Tighten the strain relief so that the power cord 
cannot be moved.
11. Replace the cover on the junction box and fasten in 
place.
The dryer is now ready to be plugged into the 3-wire 
receptacle of the proper rating.
The receptacle should be located so that the plug 
and receptacle will be accessible with the dryer in its 
installed position.
3.2 Grounding Instructions
This appliance must be grounded. In the event of 
malfunction or breakdown, grounding will reduce 
the risk of electric shock by providing a path of least 
resistance for electric current. This appliance is 
equipped with a cord having an equipment-grounding 
conductor and a grounding plug. The plug must be 
plugged into an appropriate outlet that is properly 
installed and grounded in accordance with all local 
codes and ordinances.
• 
Power cord plug must be within easy reach after 
installation.
• 
The voltage and the allowed fuse/breaker 
protection are specified in the section “Technical 
Specifications”.
• 
The stated voltage must match your mains voltage.
• 
Connection via extension cords or multi-plugs 
should not be made.
• 
The main fuse/breaker and switches must have a 
contact distance of minimum 3 mm.
B
A damaged power cable must be 
replaced by a qualified electrician.
A
WARNING – Improper connection of the 
equipment-grounding conductor can 
result in a risk of electric shock. Check 
with a qualified electrician or service 
representative or personnel if you are 
in doubt as to whether the appliance is 
properly grounded. Do not modify the 
plug provided with the appliance: if it will 
not fit the outlet, have a proper outlet 
installed by a qualified electrician.
B
The appliance must not be operated 
unless it is repaired! There is the risk of 
electric shock!
3.3 Appropriate installation location
•Install your appliance in environments that have no risk 
of freezing and in a stable and level position.
•Do not place your appliance on a long pile rug or on 
similar surfaces.
•Operate your appliance in a well-ventilated, dust-free 
environment.
•Do not block the air ducts in front of and under the 
machine.
B
Make sure that your appliance is not 
placed on the power cable.
A
Keep at least 0.6” (1.5 cm) from the 
edges of other furniture.