Frigidaire FGGF3058RW Benutzeranleitung

10

To prevent flare-ups and avoid creation of harmful

by-products, do not use the cooktop without all burner 

caps properly installed to insure proper ignition and gas 

flame size.

To avoid possible burns DO NOT touch burner caps 

or surface burner grates after using any of the surface 

burners. The surface burner grates, caps, and areas 

around them may still be very hot. Provide sufficient 

time for these areas and the parts to completely cool 

before handling.

Fig. 1 - correct burner cap 

placement

Be sure to review the Care & Cleaning section for com-

plete detailed information about cleaning the burner caps 

and proper burner cap placement.

Using the griddle (some models)

• Wash griddle in hot soapy water.

• Rinse and dry completely.

Remove the center burner grate (some models) and 

carefully replace with the griddle.

For best results, preheat the griddle for 5 minutes on 

medium or a medium low setting. Slow preheating 

provides more even heat distribution during the cooking 

process. Do not preheat the griddle on Hi setting. 

Preheating using a Hi burner setting may warp the griddle 

and prevent even heat distribution.

• To prevent possible rusting, store in a dry place and 

keep uncovered.

• After each use, clean with a stiff brush and hot water 

only, then rinse.

• Dry immediately.

• Do not clean griddle in the dishwasher.

Fig. 2 - incorrect burner cap 

placement

Visually check for proper burner cap placement before 

operating any of the surface burners (See Fig.1).

If any of the surface burner caps appears to be resting 

unevenly, not centered or appears unlevel on the burner 

head (Fig. 2), be sure to correct the burner cap position on 

the burner head before starting the surface burner.