Frigidaire FGIS3065PF Installationsanweisungen

5

The metal flange under each side of the cooktop

MUST be placed 

over the cabinet countertop for proper unit support. The cooktop 

should 

NOT rest directly on the countertop (see illustration 2) or else 

it could cause damage to the cooktop voiding the warranty. Level the 

unit if needed.

 After the installation, 

MAKE SURE that the 

unit is supported by 

the leveling legs and 

NOT by the cooktop.

The counter-top around the cut-out should be flat and leveled (see

hatched area on illustration 1)

H1

H2

H3

H4

Illustration 1

Shave 

Raised

Edge to

Clear Space 

for a 31½" 

(80 cm) Wide

 

Cooktop.

1 ½" Max.

(3.8 cm Max.)

Illustration 2

To successfully 

install the range, 

the initial level 

height from floor

to underside of 

cooktop frame 

should be at 

least 1/16" (0,16 

cm) taller than 

cabinet sides 

as measured in 

step 2.

 Before installing the unit, 

measure the heights of 

the two (2) cabinet sides 

(H1-4), front and back 

(see illustration 1) from 

the floor to the top of the

counter.

 Level the range using the leveling legs and leveling 

device (if equipped) so that the height from the 

floor to the underside of the cooktop glass frame is

greater than the tallest cabinet measurement by at 

least 1/16" (0,16 cm) (see illustration 2).

 Slide the unit into the cabinet. Make sure the center of the unit is aligned with the center of 

the cabinet cut-out.

 Remove the protective channels on each side of the cooktop (if provided).

Metal

Flange