Meyer Sound MG-3D/M Benutzerhandbuch

PN: 05.132.036.01 B2

Page 29 of 32

Meyer Sound Laboratories Inc.
www.meyersound.com

T: +1 510 486.1166
F: +1 510 486.8356

The MCF-MILO caster frame allows you to transport stacks of up to four entire MILO loudspeakers high. whether 
you’re deploying and striking a MILO array, the MCF-MILO frame can also support the weight of the array — making 
the array easy to assemble or dissemble by using blocks of up to four MILO loudspeakers.  you may use any of first 
three the top holes in the MRAL-MILO real AlignaLink to attach the MCF-MILO. Use the 1° position to achieve a 0° 
angle between the MCF-MILO frame and the MILO loudspeaker above it. The MCF-MILO's rugged steel frame means 
you can forklift it; a range of protective transport covers is also available.

 Do not exceed four MILO loudspeakers high on a block to avoid tipping over the stack.

caution: 

Avoid blocks of four with pronounced angles. Always try to keep the center of gravity as 

close as possible to the center of the caster frame to avoid tipping over the stack. Use the first hole in 

the top row (0° position) on the MRAL-MILO to move the center of gravity forward on a block with angles.

you can transport the MG-3D/M grid attached to the top MILO on a block. 

 For safety reasons, do 

not leave the caster frame attached 

to the last MILO loudspeaker when flying 
an array of MILO loudspeakers.

If you are transporting the MG-3D/M attached to the top MILO on a block and additional height is 

needed to avoid colliding with other MILO stacks, use the optional MILO wheel frame extension kit (part 

number 40.132.150.01) to raise the level of the stack by 1 inch.  

1

MCF-MILO Caster Frame

4

134.023

 3/8" x 1.5" Quick Release Pin (QRP)*  

*Includes hardware to fix the lanyard to the MCF-MILO

 when 

lifting a block with 

a forklift, always keep the 
forks wide – close to the 
MCF-MILO caster frame’s 
wheels. Doing otherwise (for 
example, moving the forks 
together in the center) may 
bend the frame.