Vanguard Managed Solutions 7300 Series Benutzerhandbuch
Modifying Your Vanguard 7300
5-13
Removing and Replacing the CPU Card and CPU Mezzanine Card (PMC)
Installing Mezzanine Cards (PMCs) on the MPC750 CPU Card
Description
This section describes how to install an Ethernet PCI PMC onto the MPC750 CPU
card. The MPC750 CPU card provides two PMC connectors, one to support the
pre-installed Memory PMC and one for a 2-Port 10/100 BaseT Ethernet PMC.
Figure 5-8 show the location where PMCs can be installed:
card. The MPC750 CPU card provides two PMC connectors, one to support the
pre-installed Memory PMC and one for a 2-Port 10/100 BaseT Ethernet PMC.
Figure 5-8 show the location where PMCs can be installed:
Figure 5-8. PMC Locations on the Vanguard 7300 MPC750 CPU Card
Note
The MPC750 CPU card Memory PMC, a Vanguard Managed Solutions-supplied
custom-designed card, is a pre-installed integral part of the MPC750 CPU card.
There is no separate order number for the MPC750 CPU Memory PMC, which
can only be installed in the MPC750 CPU card Memory PMC location.
Release 6.4 and greater supports the IBM750FX CPU that does not require a
Pre-installed Memory PMC. The IBM750FX CPU card has On-board memory.
custom-designed card, is a pre-installed integral part of the MPC750 CPU card.
There is no separate order number for the MPC750 CPU Memory PMC, which
can only be installed in the MPC750 CPU card Memory PMC location.
Release 6.4 and greater supports the IBM750FX CPU that does not require a
Pre-installed Memory PMC. The IBM750FX CPU card has On-board memory.
Ethernet PMC
Memory PMC