Vanguard Managed Solutions 7300 Series Benutzerhandbuch

Modifying Your Vanguard 7300 

5-17

Use the steps in this table to reinstall the CPU card into the Vanguard 7300 
enclosure:

Open the ejector levers.

Align the CPU card with the Slot 1 card rails on the chassis.

The CPU card always must be installed in Slot 1.

Insert the card between the slot rails and push in until you feel resistance.

Simultaneously press the ejector levers inward until they lock.

Tighten the captive screws.

Reconnect any CPU card cables.

Turn the power back on.