Vanguard Managed Solutions 7300 Series Benutzerhandbuch
5-16
Modifying Your Vanguard 7300
Removing and Replacing the CPU Card and CPU Mezzanine Card (PMC)
Figure 5-11. Installing the Ethernet PMC on the IBM750FX CPU Card
7
Position the PMC on top of the card (PMC 1 or 2) as shown in Figure 5-11.
Slide the front edge connectors into the opening labelled “PMC 1 or
PMC 2”.
Slide the front edge connectors into the opening labelled “PMC 1 or
PMC 2”.
8
Press the PMC down onto the top of the CPU card. The connectors on the
underside should connect smoothly with the J11/12/13/14 connectors.
underside should connect smoothly with the J11/12/13/14 connectors.
9
Insert the short screws at the corners of the PMC and into the standoffs on
the CPU Card. Tighten the screws.
the CPU Card. Tighten the screws.
10
Re-install the CPU card into PMC slot 1 on the enclosure according to the
instructions provided in steps 3 to 5.
instructions provided in steps 3 to 5.
Step
Action (continued)
Ethernet
PMC 1
Ethernet
PMC 2