Shiro SD2100 Benutzerhandbuch
9
6. Press
OK button to confirm
To delete call barring number
1. Press
MENU button then UP/DOWN button until the display shows BASE SET
2. Press
the
OK button, the display shows PIN?
3. Key in your PIN number
4. Press
the
OK button, then UP/DOWN button to the location BARRING
5. Press
the OK button, the display shows the call barring number you set.
6. Press
the
CLEAR button to delete the number
7. Press
OK button to confirm
Base Melody
You can adjust the Base Melody following the below instruction.
1. Press
MENU button then UP/DOWN button to the location BASE SET
2. Press
OK button and Key in the PIN number
3. Press OK button then UP/DOWN button to the location B Melody
4. Press
OK button and press UP/DOWN button to change the melody
5. Press
the OK button to confirm the melody you chosen
Base Volume
You can adjust the base volume following the below instruction
1. Press
MENU button then UP/DOWN button to the location BASESET
2. Press
OK button and Key in the PIN number
3. Press
OK button then UP/DOWN button to the location B VOLUME
The display shows the current volume level
4. Press
UP/DOWN button to change the volume
5. Press
the
OK button to confirm the volume level you chosen
Least cost route (LCR) function (Optional)
With the LCR function, the phone will automatically replace a long number (up to 11 digits)
with a comparative short number (up to 3 digits), to simplify the process of dialing a long
with a comparative short number (up to 3 digits), to simplify the process of dialing a long
number.
Example:
If you program to replace "00" with "17909", whenever you dial a number beginning with
If you program to replace "00" with "17909", whenever you dial a number beginning with
the“00”,the phone will automatically change this to “17909”. If he dials "00 15151500", the
phone will automatically replace
phone will automatically replace
the number to be dialed out as “17909 15151500”
Note:
LCR function only replaces the prefix of the phone number you dial.
To set LCR:
1. Press MENU button then UP/DOWN button to the location BASE SET
2. Press
the
OK button, the display shows PIN?
3. Key in your PIN number and press the OK button, then UP/DOWN button to the location
LCR
4. Press
the
OK button, the display shows SHORT?
5. Press the OK button, the display shows EMPTY, key in the short number you want to
replace the long number directly
6. Press
the
OK button to confirm, then the display shows LONG?
7. Press
the
OK button, the display shows EMPTY, key in the long number
8. Press
the
OK button to confirm
To Set Dial Mode
You can change dial mode to TONE or PULSE dialing.
To set dial mode:
To set dial mode:
1. Press
MENU button, then UP/DOWN button to the location BASE SET
2. Press
the
OK button, the display shows PIN?
3. Key in your PIN number and press the OK button, then press UP/DOWN button to the
location DIAL MODE