Shiro SD2100 Benutzerhandbuch
10
4. Press
the
OK button and press UP/DOWN button to change Dial mode as TONE or PULSE
dialing
To reset base
1. Press
MENU button, then UP/DOWN button to the location BASE SET
2. Press
the
OK button, the display shows PIN?
3. Key in your PIN number and press the OK button, then UP/DOWN button to the location
B RESET
4. Press
OK button, then the display shows RESET?
5. Press
OK button to confirm, or Press CLEAR button, and go back to B RESET
To change base PIN
1. Press
MENU button, then UP/DOWN button to the location BASE SET
2. Press
the
OK button, the display shows PIN?
3. Key in your PIN number and press the OK button, then UP/DOWN button to the location
MAST PIN?
4. Press OK button, the display shows PIN?, Key in the original PIN number(default
PIN:0000)
5. Repeat the step 4 and the display shows MAST PIN
6. Press
OK button, the display shows PIN?, Key in the new PIN number,
7. Repeat the step 6, and press OK button to confirm
PABX
With the PABX function, the phone will automatically pause once the initial string of the phone
number matches the PABX code. For example, if the user program to enter “9” as PABX code,
then when he dials “98118118”, then the phone will dial “9” first then pause follow by
then when he dials “98118118”, then the phone will dial “9” first then pause follow by
“8118118”.
To set PABX number:
1. Press
MENU button, then press UP/DOWN button to the location BASE SET;
2. Press
the
OK button, the display shows PIN?;
3. Key in your PIN number and press the OK button, then UP/DOWN button to the location
PABX?;
4. Press
the
OK button, the display shows PABX 1?. You may press UP/DOWN button to
select PABX 2
5. Press
the OK button, the display shows EMPTY. Key in the code. The maximum PABX
code length is 5 digits.
6. Press
OK button to confirm.
FLASH
With the FLASH function, you may select Short or Long flash time for your PABX. To set FLASH:
To set flash time:
1. Press
MENU button, then press UP/DOWN button to the location BASE SET;
2. Press
the OK button, the display shows PIN? ;
3. Key in your PIN number and press the OK button, then UP/DOWN button to the location
FLASH?;
4. Press
the OK button, the display shows SHORT? . You may press UP/DOWN button to
select LONG?
5. Press
the
OK button to confirm.
Resetting the system
If you have set a PIN and forgotten it, you need to reset the system. The PIN will be reset to
0000. If you reset the system, you will lose all stored information (including numbers in
0000. If you reset the system, you will lose all stored information (including numbers in
memory) and all features will return to their default settings. You need to register the handset
to the base unit again.
to the base unit again.
While you are resetting the system, you should disconnect the telephone line cord from the
back of the base unit, so you won't be interrupted by incoming calls. To reset the system
back of the base unit, so you won't be interrupted by incoming calls. To reset the system
without the PIN: