Heath Zenith Multi-Channel Remote Control User Manual

3

Range ....................................................................................................................................................................Up to 100 feet (30.5 m)
Rated Voltage (2-AAA Batteries) ....................................................................................................................................................  3 VDC
Frequency .................................................................................................................................................................................... 315 MHz

1.  Batteries installed incorrectly.

2.  Batteries are dead.

1.  Dip switch settings on receiver do not 

match controller.

2.  Wrong group or channel is selected.

3.  Signals  from  controller  are  being 

blocked, or transmitter is out of range.

4.  Batteries are weak.

Remote control does not come on.

Remote control will not operate receiver.

1.  Install batteries according to polarity 

markings inside remote control.

2.  Replace batteries.

1.  Check dip switch settings on receiver.

2.  Verify correct group and channel are 

selected.

3.  Check for metal objects that could block 

the signal, or reposition the transmitter 
and/or receiver.

4.  Replace batteries.

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference 
that may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could 
void the user’s authority to operate the equipment.

If you experience a problem, follow this guide. You may also want to visit our Web site at: 

www.hzsupport.com. If the problem persists, 

call* for assistance at 

1-800-858-8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to:

HeathCo LLC
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service
*  If  contacting Technical  Service,  please  have  the  following  information  available:  Model  Number,  Date  of  Purchase,  and  Place  of 
Purchase.