Panasonic AJ-HD150 User Manual
– 52 –
Setup menus
SYSTEM menu
<SYSTEM>
(continued)
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
15
VO SYS
0000
–429
H (SD)*
1
:
:
0429
0
:
:
0858
429
16
SDI SYS
0000
–429
H (SD)*
1
:
:
0429
0
:
:
0858
429
17
V PHASE
0000
–190
H (SD)*
1
:
:
0190
0
:
:
0380
190
18
SCH COAR
0000
0
H (SD)*
1
0001
90
0002
180
0003
270
19
SCH FINE
0000
–32
(SD)*
1
:
:
0032
0
:
:
0064
32
20
AV PHASE
0000
–100
:
:
0100
0
:
:
0200
100
30
MENU
0000
OFF
LOCK
0001
ON
The underline on the setting item denotes the initial setting.
*
1
: With the SD output (SD tape playback or down-conversion output)
This enables the system phase to be adjusted in 74ns steps.
-: The phase is advanced.
+: The phase is delayed.
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
-: The phase is advanced.
+: The phase is delayed.
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
This enables the SDI OUT system phase to be adjusted in
74ns steps.
-: The phase is advanced.
+: The phase is delayed.
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
74ns steps.
-: The phase is advanced.
+: The phase is delayed.
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
This enables the video system phase to be adjusted in 148ns
steps.
-: The phase is advanced.
+: The phase is delayed.
<Note>
In the case of the SD down-converter output from the HD
playback tape (when the option has been installed), the video
phase is fixed.
steps.
-: The phase is advanced.
+: The phase is delayed.
<Note>
In the case of the SD down-converter output from the HD
playback tape (when the option has been installed), the video
phase is fixed.
This enables the SCH phase to be adjusted in 90-degree
steps.
-: The phase is advanced.
+: The phase is delayed.
(The SC phase changes but the H phase remains
unchanged.)
steps.
-: The phase is advanced.
+: The phase is delayed.
(The SC phase changes but the H phase remains
unchanged.)
This enables the SCH phase to be adjusted in a total variable
range of +/-45 degrees or more.
-: The phase is advanced.
+: The phase is delayed.
(The SC phase changes but the H phase remains
unchanged.)
range of +/-45 degrees or more.
-: The phase is advanced.
+: The phase is delayed.
(The SC phase changes but the H phase remains
unchanged.)
This enables the phase of the audio output to be adjusted to
the video output by 20.8us.
-: The audio output phase is moved ahead of the video output.
+: The audio output phase is delayed from the video output.
the video output by 20.8us.
-: The audio output phase is moved ahead of the video output.
+: The audio output phase is delayed from the video output.
This selects whether to establish or release the system file
lock mode.
0: The system file lock is released (changes can be made).
1: The system files lock is engaged (no changes can be
lock mode.
0: The system file lock is released (changes can be made).
1: The system files lock is engaged (no changes can be
made).
Video output signal adjustments
A control matrix of the sdjustments is shown below.
A control matrix of the sdjustments is shown below.
SYSTEM menu
10: ENCODER SEL
10: ENCODER SEL
LOCAL
REMOTE
SYSTEM menu
11: SYS SC
11: SYS SC
LOCAL
REMOTE
LOCAL
REMOTE
SYSTEM menu
SYS SC
SYS H
SYS SC
SYS H
Unit
Unit
External encoder
remote controller
remote controller
SETUP menu
VIDEO LEVEL
CHROMA LEVEL
SET UP/HUE
VIDEO LEVEL
CHROMA LEVEL
SET UP/HUE
Unit
External encoder
remote controller
remote controller
Settings
Item adjusted