Panasonic AJ-HD150 User Manual

– 53 –

000

P-ROLL

0000

0S

TIME

:

:

0005

       5S

:

:

0015

15S

001

LOCAL

0000

DIS

ENA

0001

   ST&EJ

0002

ENA

002

TAPE

0000

    ±12h

TIMER

0001

24h

003

REMAIN

0000

    OFF

SEL

0001

ON

004

SYNCHRO-

0000

    OFF

NIZE

0001

ON

005

SUPER

0000

OFF

0001

    ON

The underline on the setting item denotes the initial setting.

This sets the preroll time which can be set from 0 to 15
seconds in 1-second increments.
<Note>
When the unit is set to automatic editing [PREVIEW, AUTO
EDIT], the unit will not operate if the preroll time is set to 0
seconds.

This selects the buttons which can be operated on the front panel
when the REMOTE/LOCAL switch has been set to REMOTE.
0: No buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All buttons except for the RECORDER and PLAYER

buttons can be operated.

This selects the 12 or 24 hour display for the CTL counter.
0: 12 hour display
1: 24 hour display

This selects whether the REMAIN (remaining tape time)
display is to be superimposed onto the HD SDI OUT3, SD SDI
OUT3 and VIDEO OUT3 connector signals.
0: Display is not superimposed.
1: Display is superimposed.
<Note>
1. Even when “1: ON” is selected, the remaining tape time will

not be displayed while this is being calculated after a tape
has been ejected or inserted.

2. The remaining tape time is not displayed when TIME has

been selected as the setup menu item No.006 (DISPLAY
SEL) setting.

This sets whether the phase is to be synchronized between
two decks.
0: The phase is not synchronized.  The edit points will be off

by several frames but editing can be entered more quickly.

1: The phase is synchronized.  Error-free editing can be

performed.

This selects whether the time code and other displays are to
be superimposed onto the HD SDI OUT3, SD SDI OUT3 and
VIDEO OUT3 connector signals.
0: Displays are not superimposed.
1: Displays are superimposed.