Toshiba 2051c User Manual

This section explains how to turn the power ON and OFF as well as the energy saving mode. How to turn the power ON differs 
between when the MAIN POWER lamp (green) on the control panel is lit and when it is not.

When the equipment is controlled under the department or user management function, enter the department code or user 
information first. For details, see the following page:
&

 P.67 “Logging in” in this manual

When the equipment is ready for copying, “READY” will appear.

When you turn the power of the equipment OFF, be sure also to shut it down by pressing the [POWER] button on the 

control panel. Do not simply turn the main power switch OFF. For details, see the following page:
&

When “ERASING DATA” appears
This message appears when the Data Overwrite Enabler has been installed. It appears immediately after the power is 

turned ON or after the equipment has been operated. You can operate the equipment even if it is displayed.

The equipment starts warming-up. “Wait Warming Up” appears 

during warming-up.

While the equipment is warming up, you can use the auto job 

start function. For details, refer to the following guide:
&

 Copying Guide (PDF): “Chapter 2: HOW TO MAKE COPIES” - 

“Making Copies”

•

•