Toshiba 2051c User Manual
1
Turning Power ON/OFF
1
Turning the power OFF (Shutdown)
When turning the power of the equipment OFF, be sure to shut it down according to the procedure below. Check the
following three points before shutdown.
No jobs should be left in the print job list.
None of the PRINT DATA lamp (blue) or the MEMORY RX / LINE lamp (green) should be blinking.
(If the equipment is shut down while any of the above lamps is blinking, jobs in progress such as FAX reception will be
aborted.)
No computer should access the equipment via the network, such as TopAccess.
•
•
•
If a job in process exists when the [POWER] button of the control panel is pressed, “Processing job will be deleted. Are you sure you
want to shutdown?” appears.
want to shutdown?” appears.
When the equipment is not used for a long period of time:
Press the [POWER] button on the control panel to
shut down the equipment, check that the [ENERGY
SAVER] button (green) stops blinking and is
definitely not lit, and then turn the power OFF with
the main power switch.
shut down the equipment, check that the [ENERGY
SAVER] button (green) stops blinking and is
definitely not lit, and then turn the power OFF with
the main power switch.
When the power is turned OFF with the main power switch, the
MAIN POWER lamp (green) will go out.
Press the [POWER] button until a “pip” sound is
heard.
heard.
“Shutdown is in progress.” appears for a while, and then the
power is turned OFF.