A&D AD-4405 User Manual

AD-4405 Weighing Indicator

Page

ZERO key

The key to zero the current display.

CLEAR key

The key to clear the setting value.

TARE key

The key to perform tare.

ESC

key

The key to proceed to the next step without changing the
parameter set.

NET/GROSS key The key to select net or gross weight in the display.

+/- key

The key to select + or – of a value.

ENTER key

Confirms settings and stores the value.

PRINT key

The key to print/output data (press and release quickly).

ON/OFF key

Turns the indicator on and off (OFF: hold for 3 seconds).

10 Printer cover

Printing paper will be stored inside when the printer is installed.

Printer

Internal dot matrix printer (optional).

4.1.2.

Rear Panel Description

No. Name

Description

11 Power

cable

Please confirm that the local voltage and receptacle type are
correct for your scale.

Grounding terminal

Connect to the Earth (M4 size screw).

13 Load cell connector

Connect a load cell using the accessory load cell plug.

14 CAL switch cover

The CAL switch is located behind the sealing panel [15].

15 Sealing panel

For type approval, available with the sealing wire posts.

16 RS-232C connector Exchange this when installing other data output (options).

4.1.3.

Other Displays and Symbols

Standby display.

Zero error when turning the display on. If the

ESC

key is

pressed, the current weighing value may should be displayed.

Over load display. Remove any load from the load cell
immediately. It may cause damage to the load cell.

An example of an error display.

4. Description of Panels and symbols