Sony XCD-SX90CR User Manual

1-2

XCD-U100/SX90/V60

XCD-U100CR/SX90CR/V60CR

1.

Remove the upper case and lower case.
(Refer to Section 1-2-1.)

2.

Remove the two screws, then pull out the rear panel
assembly.

3.

Disconnect the flexible flat cable from the connector
(CN900) on the CN-3020 board.

4.

Attach the rear panel assembly in the reverse order of

steps 1 to 3.
n
When attaching the rear panel assembly, securely
attach it while pushing it against the chassis.

CN-3020 board

CN900

Rear panel assembly

Flexible flat cable

PM2 

x

 4

PM2 

x

 4

Rear panel assembly

Chassis

n
When replacing the front panel assembly, perform the

writing the serial number and Node Unique ID and camera
adjustment. For details, refer to Sections 2-1 and 2-2.

1.

Remove the upper case and lower case.

(Refer to Section 1-2-1.)

2.

Remove the two screws, then pull out the front panel

assembly.

3.

Disconnect the flexible flat cable from the connector

(CN101) on the BI-217/218/219 board.

4.

Attach the front panel assembly in the reverse order of
steps 1 to 3.
n

When attaching the front panel assembly, securely
attach it while pushing it against the chassis.

PM2 

x

 4

PM2 

x

 4

Front panel assembly

CN101

Flexible flat 
cable

BI-217/218/219 board

This illustration is for XCD-SX90/SX90CR.

Chassis

Front panel assembly