Panasonic AJ-P2C004HG User Manual
44
Recording and Playback: Normal and Variable Speed Playback
The PLAY/PAUSE button provides monochrome playback
through the viewfinder and color playback on the LCD
monitor. A color video monitor connected to the HD SDI A ·
B or MON OUT connector of unit also provides color
playback.
The HD SDI A · B connector outputs an SDI playback (to
view the playback, the HD SDI A · B switch on the side panel
must be positioned to [MEM]).
through the viewfinder and color playback on the LCD
monitor. A color video monitor connected to the HD SDI A ·
B or MON OUT connector of unit also provides color
playback.
The HD SDI A · B connector outputs an SDI playback (to
view the playback, the HD SDI A · B switch on the side panel
must be positioned to [MEM]).
The FF and REW buttons provide 32 and 4 fast
playbacks and fast reverse playbacks.
When playback is paused, the FF button locates the
beginning of the next clip while maintaining the pause mode.
When playback is paused, the REW button locates the
beginning of the current clip while maintaining the pause
mode.
playbacks and fast reverse playbacks.
When playback is paused, the FF button locates the
beginning of the next clip while maintaining the pause mode.
When playback is paused, the REW button locates the
beginning of the current clip while maintaining the pause
mode.
Notes
When a clip with a different SYSTEM MODE cannot be
played back, change the SYSTEM MODE setting of this
unit to match the format of the clip. For more details about
the SYSTEM MODE, refer to [Recording formats and
output connector signal formats] (page 47).
When a P2 card has been just removed or inserted, or
when the power has been just turned on for playback, it
may take some time for unit to read clip information. If this
is the case, the viewfinder displays “UPDATING”. If data is
played back when the P2 card is being recognized, the
message “CANNOT PLAY” will be displayed.
If a P2 card is inserted while another P2 card is being
played back, the clips on the inserted P2 card will not be
played back. A P2 card inserted during playback will be
recognized after playback ends.
If you perform variable speed playback on a clip split
across more than one P2 card, sound may disappear for a
moment. This is not a fault.
played back, change the SYSTEM MODE setting of this
unit to match the format of the clip. For more details about
the SYSTEM MODE, refer to [Recording formats and
output connector signal formats] (page 47).
When a P2 card has been just removed or inserted, or
when the power has been just turned on for playback, it
may take some time for unit to read clip information. If this
is the case, the viewfinder displays “UPDATING”. If data is
played back when the P2 card is being recognized, the
message “CANNOT PLAY” will be displayed.
If a P2 card is inserted while another P2 card is being
played back, the clips on the inserted P2 card will not be
played back. A P2 card inserted during playback will be
recognized after playback ends.
If you perform variable speed playback on a clip split
across more than one P2 card, sound may disappear for a
moment. This is not a fault.
Text memos are time-coded thumbnails added to any video
point when a clip is being recorded or played back.
The TEXT MEMO button adds text memo information at the
appropriate point. You can edit added text memos using the
P2 Viewer.
Through a thumbnail display, you can choose and play back
the text memo point or copy any portion. For more
information, see [Text Memo] (page 126).
point when a clip is being recorded or played back.
The TEXT MEMO button adds text memo information at the
appropriate point. You can edit added text memos using the
P2 Viewer.
Through a thumbnail display, you can choose and play back
the text memo point or copy any portion. For more
information, see [Text Memo] (page 126).
a. TEXT MEMO button
Notes
One clip can have up to 100 text memos.
Text memos can also be recorded when the LCD monitor
is in thumbnail mode. In this case, the text memo is added
to the position on the clip where the cursor is set (normally
at the beginning) only.
Text memos cannot be recorded when the color bar is
output or the unit is in LOOP REC mode and INTERVAL
REC mode.
Text memos can also be recorded when the LCD monitor
is in thumbnail mode. In this case, the text memo is added
to the position on the clip where the cursor is set (normally
at the beginning) only.
Text memos cannot be recorded when the color bar is
output or the unit is in LOOP REC mode and INTERVAL
REC mode.
Normal and Variable Speed Playback
Variable speed playback
Text Memo Function
a
AJ-HPX2700G-VQT1V27_eng.book 44 ページ ２００８年９月２日 火曜日 午後５時４３分