Renesas rl78 User Manual
RL78/G1A
CHAPTER 3 CPU ARCHITECTURE
R01UH0305EJ0200 Rev.2.00
91
Jul 04, 2013
3.4.8 Based indexed addressing
[Function]
Based indexed addressing uses the contents of a register pair specified with the instruction word as the base
address, and the content of the B register or C register similarly specified with the instruction word as offset address.
The sum of these values is used to specify the target address.
[Operand format]
Identifier Description
−
[HL+B], [HL+C] (only the space from F0000H to FFFFFH is specifiable)
−
ES:[HL+B], ES:[HL+C] (higher 4-bit addresses are specified by the ES register)
Figure 3-33. Example of [HL+B], [HL+C]
FFFFFH
F0000H
rp(HL)
[HL+B]㧘ޓ
[HL+C]
r(B/C)
OP-code
Offset
Instruction code
<1> <2>
<1>
<1>
<2>
<2>
Target memory
Memory
Address of
an array
A pair of registers <1> specifies the address where the target
array of data starts in the 64 KB area from F0000H to
FFFFFH.
Either register <2> specifies an offset within the array to the
target location in memory
Target
array
of data
Other data in
the array
Figure 3-34. Example of ES:[HL+B], ES:[HL+C]
X0000H
rp(HL)
X0000H
ES
ES: [HL+B]㧘
ES:
[HL+C]
r(B/C)
OP-code
byte
XFFFFH
Target
array
of data
Address of
the array
<3>
The ES register <1> specifies a 64 KB area within the overall
1 MB space as the four higher-order bits, X, of the address range.
A pair of registers <2> specifies the address where the target
array of data starts in the 64 KB area specified in the ES
register <1>.
Either register <3> specifies an offset within the array to the
target location in memory.
Specifies a
64 KB area
Offset
<3>
<3>
<1>
<1> <2> <3>
<3>
<1>
<1>
<2>
<2>
<2>
Target memory
Memory
Instruction code
Other data in
the array