Renesas rl78 User Manual
RL78/G1A
CHAPTER 2 PIN FUNCTIONS
(2/2)
Function Name
I/O
Function
V
DD
−
<25-pin, 32-pin 48-pin>
Positive power supply for port pin other than P20 to P27, P150 and RESET,
REGC pin.
<64-pin >
Positive power supply for P121 to P124, P137 and RESET, REGC pin.
EV
DD0
−
Positive power supply for ports (other than P20 to P27, P121 to P124, P137,
P150 to P154)
AV
DD
−
Positive power supply for P20 to P27, P150 to P154, and A/D converter
AV
REFP
Input
A/D converter reference potential (+ side) input
AV
REFM
Input
A/D converter reference potential (
− side) input
Make AV
REFM
pin the same potential as AV
SS
and V
SS
pin.
V
SS
−
<25-pin, 32-pin, 48-pin>
Ground potential for port pin other than P20 to P27, P150 and RESET, REGC
pin.
<64-pin>
Ground potential for P121 to P124, P137 and RESET, REGC pin.
EV
SS0
−
Ground potential for ports (other than P20 to P27, P121 to P124, P137, P150 to
P154)
Make EV
SS0
pin the same potential as V
SS
pin.
AV
SS
−
Ground potential for A/D converter, P20 to P27, and P150 to P154. Use this pin
with the same potential as EV
SS0
, and V
SS
.
TOOLRxD
Input
UART reception pin for the external device connection used during flash memory
programming
TOOLTxD
Output
UART transmission pin for the external device connection used during flash
memory programming
TOOL0
I/O
Data I/O for flash memory programmer/debugger
Caution After reset release, the relationships between P40/TOOL0 and the operating mode are as follows.
Table 2-2. Relationships Between P40/TOOL0 and Operation Mode After Reset Release
P40/TOOL0 Operating
Mode
EV
DD0
Normal operation mode
0 V
Flash memory programming mode
For details, see 25.4 Serial Programming Method.
Remark Use bypass capacitors (about 0.1
μ
F) as noise and latch up countermeasures with relatively thick wires at
the shortest distance to V
DD
to V
SS
, EV
DD0
to EV
SS0
lines.
R01UH0305EJ0200 Rev.2.00
34
Jul 04, 2013