Avaya 03-300430 User Manual

If the status is bad, the DSPs are taken out-of-service. A reset of the Aggregator hardware is 
attempted, and if this is successful the DSPs are placed pack into service.

This test is nondestructive.
This test sends a request for a count of packets received by the firmware from the LAN bus on 
the TN2602AP IP Media Resource. This test is based on the Medpro DSP looparound test. The 
Packet Count Query requests the packet count value from the IP Media Resource, runs the 
looparound test on an available port, then requests a second packet count value from the IP 
Media Resource. If the second value is greater than the first, then the packet bus is working. If 
the second value is not greater than the first, then there is a problem with the packet bus.

2000

ABRT

Response was not received within the allowable time

2012

ABRT

System call failed

2100

ABRT

Could not allocate the necessary system resources to run this test

2500

ABRT

Internal system error

1

FAIL

Reset- not initialized

2

FAIL

Heartbeat failure

5

FAIL

Aggregator stuck in reset

6

FAIL

Aggregator disabled

255

FAIL

Internal error

1000

ABRT

Could not seize port for maintenance

1001

ABRT

Connection manager could not seize the port

1002

ABRT

No time slots available

 1 of 2