Avaya 03-300430 User Manual

1 to 88

FAIL

The test failed because the MM710 interface Media Module and the 

remote DS1 endpoint are not synchronized to the same clock rate. The 

MM710 interface Media Module detected a slip alarm. The Error Code 

equals the number of slips detected by the MM710 interface Media 

Module since the last slip alarm inquiry test.
If the MM710 connects to a T1 network facility or to another switch, do 
the following:

1. Retry the command at 1-minute intervals for a maximum of 5 

times.

2. For a DS1 interface Media Module, enter the list measurement 

ds1-log location command to read the error seconds 

measurement.

3. Verify that both endpoints of the DS1 link are administered using 

the same signaling mode, framing mode, and line coding.

4. Check the physical connectivity of the MM710 interface Media 

Modules and the cable.

5. Replace the local MM710 interface Media Module, and repeat the 

test.

6. Contact T1 Network Service or the technician at the remote switch 

to diagnose the remote DS1 endpoint.

 2 of 4