Avaya 03-300430 User Manual
NO-LIC (No License)
Issue 1 June 2005
1727
NO-LIC (No License)
S8700 | 8710
/
S8500
/
S8300
Note:
Note:
The NO-LIC MO (No License) is non-traditional in that there are no associated
tests or commands that you can execute.
tests or commands that you can execute.
How systems go into No-License mode
The NO-LIC MO works with the LIC-ERR MO to find any errors/violations associated with the
License File. Once a License File error occurs, LIC-ERR logs the error, raises an alarm, and
generates the following SAT login message:
License File. Once a License File error occurs, LIC-ERR logs the error, raises an alarm, and
generates the following SAT login message:
“System Administration Will Be Blocked in Approximately XXX hours.
Contact Your Service Representative.”
Entry into License-Error mode starts a timer that, when expired, causes the system to enter
No-License mode (see
No-License mode (see
Communication Manager enters No-License mode, the following SAT warning message
displays:
displays:
“System Administration Is Blocked.
Contact Your Service Representative Immediately.”
The system also responds with these conditions:
●
“LICENSE ERROR” displays on all stations and consoles when they go off-hook, but
disappears when the first digit is pressed. This display message does not interfere with the
normal use of any station or console.
disappears when the first digit is pressed. This display message does not interfere with the
normal use of any station or console.
●
All terminal-login sessions are terminated.
●
Any subsequent terminal-login sessions are limited to
- Maintenance commands.
- License File installation command.
MO Name in
Alarm Log
Alarm Log
Alarm
Level
Level
Initial Command to Run
Full Name of MO
NO-LIC
MAJ
None
NO License