Avaya 03-300430 User Manual

This test is nondestructive.

Test #1417 is a nonstandard test, since it does not specify and list Error Codes in the usual 
manner. If this background test detects a failure, the test is retried using different IP endpoints (if 
available) from the same two network regions. If the test still fails between these network 
regions:

1. Maintenance software marks the connectivity between them as “failed.”

2. Communication Manager denies every attempted call between them.

For this test, devices that can serve as IP endpoints include:

●

IPMEDPRO

●

MEDPRO

●

CLAN-BD

●

IP phones or Softphones, with the ability to initiate a ping

For a network region without an IPMEDPRO, MEDPRO, or a CLAN-BD, Test #1417 looks for 
another ping-capable endpoint. If found, the region’s testing continues. If not, the test assumes 
that the region’s connectivity is okay.

1
2
11

ABRT

Internal error

1. Retry the command at 1-minute intervals up to 3 times.

2.  If the problem persists, escalate the problem.

1005

ABRT

Incorrect test configuration.

1. Verify Ethernet link is in service on all CLAN boards in source and 

destination with status port location or status link n).

1125

ABRT

Ethernet link not in service.

1. Verify Ethernet link is in service for all CLAN boards in the source 

and destination regions under test using status port location 

or status link n. If interface is enabled, the ethernet link is 

expected to be in-service for this test to run.

 1 of 3