Avaya 03-300430 User Manual

1004

ABRT

The port has been seized by a user for a valid call. Use status 
pri-endpoint extension to determine when the port is available for 

testing.

1. Retry the command at 1-minute intervals up to 5 times.

1117

ABRT

A service state audit message is outstanding.

1. Wait 2 minutes and then try again.

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2020

ABRT

The test did not run due to an existing error on the specific port or a more 
general circuit pack error.

1. Examine the Error Log for existing errors against this port or the circuit 

pack, and follow recommended procedures.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

Any

FAIL

The NPE of the tested port was found to be transmitting in error. This will 
cause noisy and unreliable connections. The PE-BCHL is moved to 
out-of-service/near-end state.

1. Replace the circuit pack.

PASS

The port can communicate over the TDM bus.

 2 of 2