Avaya 03-300430 User Manual

This nondestructive test determines the state of the PPP link. The test passes only if the link is 
up.

2500

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 3 times.

1

FAIL

System software indicates at least one PPP link session is down (SOME 
UP).

1. Isolate downed sessions (status port location or status 

link n). 

Follow actions based on session information.

2

FAIL

System software indicates every PPP session is down (ALL DOWN).

1. Test the port (test port location) to verify the SCOTCH 

Synchronous Loop-around test (#1275) result.

2. If test passes, wait for system software to indicate ALL UP.

3. If the test fails, check the destination and other components in the 

path.

4. If the destination and other components in the path are in-service, 

take action based on session information.

PASS

Every session up.

 2 of 2

1124

ABRT

ppp link is not enabled.

1. Verify that the ppp link is enabled (status port location, 

status link n, or display data-module).

2. If the link is not enabled, enable the link (change data-module).
3. Repeat the test.

 1 of 2