Avaya 03-300430 User Manual

2000

ABRT

Response to the test was not received from the C-LAN circuit pack within 
the allowable time period.

1. If this result occurs repeatedly, attempt to reset the circuit pack if the 

other ports on the board are idle (amber LED is off). Reset the circuit 
pack by issuing busyout board location, reset board 
location, and release board location.

2. If this result occurs again, replace the circuit pack.

2012

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 3 times.

2100

ABRT

The necessary system resources to execute the test could not be 
allocated.

1. Retry the command at 1-minute intervals up to 5 times.

2500

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 3times.

2800

ABRT

No C-LAN in the same region.

1. Verify translations and retest.

2801

ABRT

No IP address defined.

1. Verify translations and retest.

2802

ABRT

Different IP address pinged than software had allocated for the test.

1. Retry the command at 1-minute intervals up to 3 times.

7 

89 

1007

FAIL

PING to the destination failed through this port because the destination 

was down.

1. Verify that at least one destination reachable through this port is “up”. 

Once verified, execute test signaling-group grp# to verify that 

the SIP Signaling Group Ping test (#1387) passes.

PASS

PING through this port was successful.

 2 of 2