Avaya 03-300430 User Manual

Page of 2574
Communication Manager Maintenance-Object Repair Procedures
2236 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
 
2213
ABRT
The call has timed-out, perhaps because of a lack of system 
resources.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to abort, escalate the problem.
2214
ABRT
Call terminated by unexpected disconnect.
1. Wait one minute and then try again.
2215–
2219
ABRT
Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to abort, escalate the problem.
2220
ABRT
Call terminated prematurely.
1. Wait one minute and try again.
2221–
2226
ABRT
Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to abort, escalate the problem.
2227
ABRT
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to abort, escalate the problem.
2042
FAIL
This is the main purpose of the test. The comparison of the data 
sent with the data received indicates a loss of integrity on the 
communications path.
1. The trunk should be taken out-of-service and the quality of the 
ISDN trunk-side BRI facility should be investigated. The 
investigation should include an in-depth analysis of the facility 
including the transmission facility and any external equipment 
such as DACs, CSUs, etc.
PASS
The call worked. A test pattern was sent and received properly; the 
communications path is OK if the synchronous test call command was 
entered. An in-depth analysis of the ISDN trunk-side BRI facility 
including the transmission facility and any external equipment such as 
DACs, CSUs, and others should take place if the bit and block error 
rates are not acceptable.
Table 800: Test #258 ISDN Test Call  (continued)
Error
Code
Test
Result
Description / Recommendation
 6 of 6