Avaya 03-300430 User Manual

The S8300 Media Server has a total of 6 LEDs on the faceplate (

on page 283). The three standard, red, green, and yellow LEDs. See 

on page 284 for a detailed description of these LEDs. 

The three additional LEDs: 

●

A fourth LED labeled “OK-to-Remove”, which indicates when the S8300’s disk is properly 
shut down.

●

Fifth and sixth LEDs, located on the lower left and right sides, respectively, of the 
Services Port, which indicate whether or not data is being sent over the RJ45 jack, and 
the data rate.

Activity

Connection speed

●

LED is off: there is a 10 BASE-T active link.

●

LED is green: there is a 100 BASE-T active link.

●

LED is orange: there is a 1000 BASE-T active link.

1

2

LINK TX/RX

LINK TX/RX

PCI

1

PCI 2

100-127 -, 3,0A, 50/60 Hz
200-240 -, 1,5A, 50/60 Hz

133 MHz/64 Bit, 100 MHz/64 Bit

h3msble2 KLC 082503

100-127 -, 3,0A,
200-240 -, 1,5A, 5