Avaya 03-300430 User Manual

 / 

: T

his test aborts with Error Code 1412.

This test verifies that the NPE channel for the port being tested correctly performs the 
conferencing function.

Any

FAIL

This test can fail due to either on- or off-board problems.  Off-board 
problems include TDM-BUS faults, EXP-PN,  EXP-INTF, and RMC-ENV 
faults, and faults associated with the Tone Detectors/Tone Generators.  
Clear every off-board problem before replacing the board.

1. A TDM-BUS problem is usually the result of a faulty board connection 

to the backplane, or bent pins on the backplane.  Resolve any 
TDM-BUS errors in the error log.

2. Resolve any any EXP-PN, EXP-INTF, and RMC-ENV errors in the 

error log.

3. Resolve any TONE-BD and/or TONE-PT errors in the error log.

4. Test the board when the faults from steps 1, 2, and 3 are cleared.  

Replace the board only if the test fails.  

PASS

The port is correctly using its allocated time slots.  Investigate user-reported 

troubles on this port by running other port tests, by examining station wiring, 

or by inspecting the station.

0

NO 

BOARD

The test could not relate the internal ID to the port (no board).  This result 
could be due to incorrect translations, no board is inserted, an incorrect 
board is inserted, or an insane board is inserted.

1. Check to make sure that the board translations are correct.  Enter 

list configuration and resolve any problems.

2. If the board is correctly inserted, enter busy board location
3. Enter reset board location
4. Enter release board location
5. Enter test board location long

This should re-establish the link between the internal ID and the port.  If not, 

verify that a valid board is inserted.

 4 of 4