Avaya 03-300430 User Manual

Notes:

a. Event ID #2 Test failed — Error counter query for single-bit EDC (bad error register) on 

the SDRAM is pegging. If the test detects 20 consecutive failures, the following Warning 
alarm is logged:

#1,ACT,[DAJ1|DAL1],A,2,WRN,Single-bit EDC test (bad SB err count)

b. Event ID #3 SDRAM has multiple bit errors — The [DAJ1|DAL1] board can also 

generate this event as an in-line error.

If this test detects a failure, the media server’s state of health is lowered to its most 
critical level, and the following Major alarm is logged:

#1,ACT,[DAJ1|DAL1],A,3,MAJ, SDRAM multibit errors

c. Event ID #4 Looparound test failed — Either a mismatched address or a mismatched bit 

pattern could have caused a failure.

If this test detects 3 failures, the following Minor alarm is logged:

#1,ACT,[DAJ1|DAL1],A,4,MIN,Local Looparound test failure

d. Event ID #5 Optical Line Receiver experiencing CRC errors — If this test detects 3 

failures, the following Minor alarm is logged:

#1,ACT,[DAJ1|DAL1],A,5,MIN,Link Receiver CRC errors

e. Event ID #6 Inability to open a communications link with the Duplication Memory board. 

The board is out of service if this failure occurs once, and a Major alarm is logged:

#1,ACT,[DAJ1|DAL1],A,6,MAJ,Failed to open [DAJ1|DAL1] card

2 (

)

Read Error Register test (EDC single-bit 

errors)

WRN

ON

3 (

)

Read Error Register test (SDRAM multibit 

errors)

MAJ

ON

)

DAJ1/DAL1 Local Looparound test

MIN

ON

5 (

)

Read Error Register test (Link Receiver CRC 

errors)

MIN

ON

6 (

)

Read Error Register test (Link Receiver CRC 

errors)

MAJ

ON