Avaya 03-300430 User Manual

1015

ABRT

The port is not in the out-of-service state.

1. Display the BRI Port Status screen via status bri-port location 

to determine what stations or adjuncts are on this port.

2. Use the extension shown on this screen in status station to 

determine whether the station or adjunct is active.

3. If so, wait until it is idle, and then busyout the port with busyout port 

location to place it in the out-of-service state and repeat this test.

!

WARNING:

Since the “busyout” command is destructive, execution of 
this command prior to the port being idle causes every call 
associated with BRI endpoints and every transaction 
associated with ASAI or Avaya adjuncts on the port to be 
torn down.  Note that 3

rd

-party calls established by an ASAI 

or Avaya adjunct remain connected even though the port is 
taken out-of-service.

1139

ABRT

The PN’s packet bus is out-of-service.

1. Follow the repair procedures for the packet bus.

2. After completing step 1, execute test port long location, and 

review the results of the BRI Port Local LAN Loop Around test to verify 
the repair.

1141

ABRT

The PKT-CTRL is out-of-service.

1. Follow the repair procedures for the PKT-CTRL.

2. After completing step 1, execute test port long location, and 

review the results of the BRI Port Local LAN Loop Around test to verify 
the repair.

1144

ABRT

The Port Network (PN) Packet Bus is out-of-service.

1. Follow the repair procedures for the Packet Bus.

2. After completing Step 1, execute test port long location, and 

review the results of the BRI Port Local LAN Loop Around Test to verify 
the repair.

 1 of 2