Avaya 03-300430 User Manual

Page of 2574
Communication Manager Maintenance-Object Repair Procedures
916 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
 
DIG-IP-STN (Digital IP Station)
S8700 | 8710
 / 
S8500
The DIG-IP-STN MO represents Softphone and Avaya 46XX phones. Softphone has some 
DCP maintenance capability in the form of audits, updates, error log entries, and test to clear 
values. Avaya 46XX IP phones communicate to the switch via an IP LAN and emulate DCP 
signaling carried over TCP.
The IP phone is not attached to a port board. Insertion of the phone is driven by successful 
registration of the endpoint, not by board insertion. It is maintained via a set of explicit TCP/IP 
ping requests and errors reported by the User Manager software, which terminates the H.323 
signaling portion of each endpoint. The MO follows standard maintenance methodology and 
supports testbusyoutrelease and status commands.
A registered extension has a port number or ID in the form of SNNNNN, where N is a digit from 
0–9. This ID indicates that the extension is a virtual port and a station. 
Note:
Note:
A port number or ID of SNNNNN does not necessarily indicate that the extension 
is registered. A registered extension retains the SNNNNN port number or ID, 
even if the extension later unregisters. 
Maintenance for Softphone includes Error Log Entries and Test to Clear Values.
MO Name in 
Alarm Log
Alarm 
Level
Initial SAT Command to Run
Full Name of MO
DIG-IP-S
WRN
test station extension
Digital IP Station
Table 312: DIG-IP-STN Digital IP Station Error Log Entries 
Error 
Type
Aux 
Data
Associated Test
Alarm 
Level
On/Off 
Board
Test to Clear Value
0
0
Any
Any
test station extension
)
Registration Status 
Inquiry (#1372)
WRN
OFF
)
0
busyout port | 
station
WRN
OFF
release port |station
Signaling Path PING test 
(#1373)
WRN
OFF
(
)
Digital Terminal Lamp 
Update (#16) 
WRN
OFF
 1 of 2