Bosch 9 6 BLCC110U User Manual
Solution 64
16
Bosch Security Systems 09/06 BLCC110U
User Guide
Inputs > Commands >
Bypass Zones
MENU 3-0-2
This menu allows you to bypass or un-bypass a single or multiple
zones before you turn the area All On, Part On or Part 2 On.
When bypassing zones, it disables the ability for a zone to detect
intrusion and sound an alarm.
zones before you turn the area All On, Part On or Part 2 On.
When bypassing zones, it disables the ability for a zone to detect
intrusion and sound an alarm.
A burglary zone will automatically become un-bypassed when
you turn the corresponding area off (disarm). Any 24-Hr fire or
24-Hr non fire zones will need to be manually un-bypassed.
Enter programming mode (PIN + MENU) then,
you turn the corresponding area off (disarm). Any 24-Hr fire or
24-Hr non fire zones will need to be manually un-bypassed.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [3] + [0] + [2].
A list of zones that can be bypassed will display on the
keypad. A ‘√’ displayed on the right side of the zone
name indicates that the zone is already bypassed.
keypad. A ‘√’ displayed on the right side of the zone
name indicates that the zone is already bypassed.
Z001 Zone 1 Name
Z002 Zone 2 Name
Z003 Zone 3 Name
Z002 Zone 2 Name
Z003 Zone 3 Name
Press
OK or MENU
2. Use the [
↑] and [↓] keys to select the zone that you want
to bypass, then press [OK]. Alternatively, you can enter
the zone number that you want to bypass, then press
[OK].
the zone number that you want to bypass, then press
[OK].
If the zone is bypassed, the keypad will prompt:
Zone 1 Name Z001 is
bypassed. To un-bypass,
press OFF.
bypassed. To un-bypass,
press OFF.
Press OK or MENU
If the zone is not bypassed, the keypad will prompt:
Zone 1 Name Z001 is
un-bypassed. To bypass,
press ON.
Press OK or MENU
un-bypassed. To bypass,
press ON.
Press OK or MENU
3. Press [ON] or [OFF] to toggle the zone to be bypassed/un-
bypassed.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Repeat steps 1 to 4 to bypass or un-bypass additional
zones.
zones.
Inputs > Commands >
Set Chime Zones
MENU 3-0-3
This menu allows you to program zones to be monitored when
the system is turned off. Chime mode is ideal to monitor a front
door to sound the keypad buzzer when opened (faulted).
Enter programming mode (PIN + MENU) then,
the system is turned off. Chime mode is ideal to monitor a front
door to sound the keypad buzzer when opened (faulted).
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [3] + [0] + [3].
A list of areas will display on the keypad.
2. Use the [] and [] keys to select the area that you want
to program zones for chime mode, then press [OK].
Alternatively, you can enter the area number that you
want to program chime zones, then press [OK].
Alternatively, you can enter the area number that you
want to program chime zones, then press [OK].
The keypad will list all zones that can be programmed for
chime mode. A ‘’ displayed on the right side of the zone
name indicates that the zone is already set for chime.
chime mode. A ‘’ displayed on the right side of the zone
name indicates that the zone is already set for chime.
Z001 Zone 1 Name
Z002 Zone 2 Name
Z003 Zone 3 Name
Z003 Zone 3 Name
Press
OK or MENU
3. Use the [
↑] and [↓] keys to select the zone that you want
to set for chime, then press [OK]. Alternatively, you can
enter the zone number that you want to set for chime,
then press [OK].
enter the zone number that you want to set for chime,
then press [OK].
If the zone is not programmed for chime, the keypad will
prompt:
prompt:
Zone 1 Name Z001
Zone Chime is OFF,
To turn ON, Press ON.
Zone Chime is OFF,
To turn ON, Press ON.
To Go Back Press OK
If the zone is programmed for chime, the keypad will
prompt:
prompt:
Zone 1 Name Z001
Zone Chime is ON.
To turn OFF, Press OFF.
Zone Chime is ON.
To turn OFF, Press OFF.
To Go Back Press OK
4. Press [ON] or [OFF] to toggle the zone to be monitored
when chime mode is turned on.
5. Press [OK] to save and exit, or press [MENU] to exit
without saving.