Bosch CC408 User Manual
CC408 | Operators Guide | 8. Radio Transmitter Operations
EN | 10
Bosch Security Systems | 5/04 | 920050O.OG.112
8.
Radio Transmitter
Operations
Operations
Figure 3: RE012/E – 2 Channel Keyfob
Transmitter
1
2
3
1 – Button 1: Arm or disarm in AWAY Mode
2 – Button 2: Arm or disarm STAY Mode
3 – Buttons 1 and 2: Press both buttons at same
2 – Button 2: Arm or disarm STAY Mode
3 – Buttons 1 and 2: Press both buttons at same
time to activate Panic alarm.
Figure 4: RE013/E – 4 Channel Keyfob
Transmitter
3
2
1
4
1 – Button 1: Arm or disarm in AWAY Mode
2 – Button 2: Arm or disarm in STAY Mode
3 – Buttons 1 and 2: Press both buttons at same
2 – Button 2: Arm or disarm in STAY Mode
3 – Buttons 1 and 2: Press both buttons at same
time to activate Panic alarm.
4 – Buttons 3 and 4: Your security company can
program these buttons for optional operation,
such as operating a garage door.
such as operating a garage door.
Audible/Visual Indications
When using hand held keyfob transmitters to operate
the system, your security company can program the
keyfobs to sound the horn speaker or operate the
blue strobe light. These indications allow you to
operate the system from outside the premises with
confidence.
the system, your security company can program the
keyfobs to sound the horn speaker or operate the
blue strobe light. These indications allow you to
operate the system from outside the premises with
confidence.
Table 9:
Keyfob Audible/Visual Indications
Indication
Definition
One beep
System disarmed.
Two beeps
System armed in AWAY Mode.
Two-tone beep
System armed in STAY Mode.
3-second strobe
System disarmed.
6-second strobe
System armed in AWAY or STAY
Mode.
Mode.
9.
Alarms
9.1 Duress
Alarm
A codepad duress alarm is used as a silent hold-up
alarm. This only occurs when the number 9 is added
to the end of any valid user code used to disarm the
system (for example, [2 5 8 0 9 #]). A duress alarm is
only useful if your system reports back to a
monitoring station or pocket pager, because domestic
reporting (such as a mobile phone) cannot decipher
which type of alarm occurred.
alarm. This only occurs when the number 9 is added
to the end of any valid user code used to disarm the
system (for example, [2 5 8 0 9 #]). A duress alarm is
only useful if your system reports back to a
monitoring station or pocket pager, because domestic
reporting (such as a mobile phone) cannot decipher
which type of alarm occurred.
Figure 5: CP5 LED Codepad Showing Audible
Alarm Buttons
9.2 Panic
Alarm
An audible alarm activates when the [1] and [3] keys
or the [*] and [#] keys are pressed simultaneously.
Contact your installer to disable the ability to activate
the codepad panic alarm or to silence the codepad
panic alarm.
or the [*] and [#] keys are pressed simultaneously.
Contact your installer to disable the ability to activate
the codepad panic alarm or to silence the codepad
panic alarm.