Wayne-Dalton AND 9600 User Manual

Tools Needed:

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your 

local yellow pages/business listings or go to the 

Find a Dealer section online at www.Wayne-Dalton.com

DO NOT INsTall Pull ROPEs 

ON DOORs WITH ElECTRIC 

OPERaTORs. CHIlDREN May 

BECOME ENTaNGlED IN THE 

ROPE CausING sEVERE OR 

faTal INjuRy.

Measure and mark the jamb 

approximately 48” to 50” (1220 to 1270 

mm) from floor on the right or left side 

of jamb. Drill 1/8” pilot hole for No. 6 

screw eye.  Tie the pull rope to the No. 

6 screw eye and to the bottom bracket 
as shown.

NO. 6 sCEW EyE

Pull ROPE

BOTTOM BRaCkET

Pull ROPE

❉

Power Drill

1/8” Drill Bit