Tascam SN29401376 User Manual

■

`

Off 

`

BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD, 
EXTRA1, EXTRA2:

Selects the input source for which the HDMI 
Through function is enabled.

`

Last:

The HDMI Through function is activated on the input 
source selected at the time of setting the AV receiver 
to standby mode.

When enabling the HDMI Through function, regardless of 
whether the AV receiver is on or in standby, both audio 
and video streams from an HDMI input will be output to 
the TV or other components via HDMI connection. The 
HDMI indicator will be dimly-lit in standby mode. Note 
that the indicator may not light under certain conditions 
(

This setting is fixed to “Auto” automatically when the 
above “HDMI Control(RIHD)” setting is set to “On”, 
resulting in automatic input source selection.

• Only an input source assigned to an HDMI IN via “HDMI Input” 

setting is enabled (

• The power consumption in standby mode will increase during the 

HDMI Through function; however in the following cases, the 
power consumption can be saved:
– The TV is in standby mode.
– You are watching a TV program.

• Refer to the connected component’s instruction manual for 

details.

• Depending on the connected component, the correct input source 

may not be selected with the setting fixed to “Auto”.

• This setting is set to “Off” automatically when the “HDMI 

Control(RIHD)” setting is set to “Off”.

■

`

Off 

`

This preference determines whether the incoming audio 
signal is output from the HDMI output. You may want to 
turn this preference on if your TV is connected to the 
HDMI output and you want to listen to the audio from a 
connected component through your TV’s speakers. 
Normally, this should be set to “Off”.

• If “On” is selected and the audio can be output from the TV, the 

AV receiver will output no sound through its speakers. In this 
case, “TV Speaker” appears on the AV receiver’s display by 
pressing DISPLAY.

• When “HDMI Control(RIHD)” is set to “On”, this setting is 

fixed to “Auto”.

• With some TVs and input signals, no sound may be output even 

when this setting is set to “On”.

• When “Audio TV Out” or 

“

HDMI Control(RIHD)” is set to 

“

”

 and you’re listening through your TV’s speakers 

(

➔ page 14), turning up the AV receiver’s volume control will 

make the sound be output from the AV receiver’s front left and 
right speakers. To stop the AV receiver’s speakers producing 
sound, change the settings, change your TV’s settings, or turn 
down the AV receiver’s volume.

• Listening mode cannot be changed when this setting is set to 

“On” and the input source is not HDMI.

■

`

`

Auto:

The audio signal from your TV tuner can be sent to 
HDMI OUT of the AV receiver.

The audio return channel (ARC) function allows an ARC 
capable TV to send the audio stream to HDMI OUT of the 
AV receiver. To use this function, you must select the 
TV/CD input selector and your TV must be ARC capable. 
The ARC indicator will light when the audio signal is 
detected. Default setting: “

”

• This setting is fixed to “- - - -” when the “HDMI 

Control(RIHD)” setting is set to “Off”.

• This setting is set to “Auto” automatically when the “HDMI 

Control(RIHD)” setting is set to “On” for the first time.

• If you set “Audio Return Channel” to “Auto”, the “Audio 

Selector” settings of the TV/CD input selector will be 
automatically switched to “ARC” (

■

`

`

On 

This function allows the AV receiver to automatically 
correct any delay between the video and the audio, based 
on the data from the connected monitor.

• This function works only if your HDMI-compatible TV supports 

HDMI Lip Sync.

After changing the settings of the “HDMI 
Control(RIHD)”, “HDMI Through” or “Audio 
Return Channel”, turn off the power on all connected 
pieces of equipment and then turn them on again. Refer 
to the user’s manuals for all connected pieces of 
equipment.