Tascam SN29401376 User Manual

In addition to the main listening room, you can also enjoy 
playback in another room, or as we call Zone 2. And, you 
can select a different source for each room.

This setup allows 5.1-channel playback in your main 
listening room and 2-channel stereo playback in Zone 2.

• With the default settings, the Zone 2 volume must be set on the 

Zone 2 amplifier. If your Zone 2 amplifier has no volume control, 
change the setting so that you can set the Zone 2 volume on the 
AV receiver. See “Multi Zone” (

See “Multi Zone” (

➔ page 60).

■

■

To control Zone 2, you must press ZONE2 on the remote 
controller first.

Main room

TV

Zone 2

AV receiver

Receiver/

integrated amp

To turn on Zone 2 and select an input source, press 
ZONE 2 followed by an input selector button within 
8 seconds.
Zone 2 turns on, the Z2 indicator lights on the AV 
receiver’s display.

• The corresponding trigger output goes high (+12 V).

To select the same source as the main room’s, press 
ZONE 2 twice. “Z2 Sel: Source” appears on the AV 
receiver’s display.

Input selector buttons

The zone is turned off.

• The corresponding trigger output goes low (0 volts).

8RECEIVER.

Zone 2 turns on, the Z2 indicator lights on the AV 
receiver’s display.

• The corresponding trigger output goes high (+12 V).

8RECEIVER.
The zone is turned off.

• The corresponding trigger output goes low (0 volts).

8RECEIVER

q/w