Yamaha RX-V3900 User Manual

If you have finished the settings, press 9l 
to return to the previous menu level and then 
press 9n to select “Start”.

Press 9

ENTER to start the measurement.

This unit starts to count down from 10 seconds.

y

• To start the measurement immediately, press 9ENTER 

again.

• To cancel the automatic setup and return to the previous 

screen, press 0RETURN.

Loud test tones are output from each speaker during 
the measurement. Once all items are measured, 
“Measurement Completed Successful” appears.

If an error or warning message appears, see “Error and 
warning messages” (page 32).

Press 9

ENTER to exit from the “Result” 

y

• To view the measurement results in detail, press 9h. 

Press 9k / n repeatedly to toggle between parameters 
(page 35). Press 9l to return to the “Result” screen.

• To retry the measurement from step 4, press 9k.

Press 9l to save the measurement results 
or 9h to discard them.

Press I

MENU to turn off the GUI menu and 

■ Error and warning messages

If an error or warning message appears during the 
automatic setup procedure, carry out one of the following 
operations. For details on each message, see “Automatic 
setup” (page 113).
• To view the details on the error and warning messages, 

press 9h. Press 9k / n to display the previous/next 
page (if available). Press 9l to return to the previous 
menu level.

• To return to the GUI menu, press 9l.
• To retry the measurement, press 9k.
• To ignore the message and continue the process, press 

9

n.

Some operations cannot be performed depending on the type of 
error (or warning).

Distance 
(Speaker distance)

This unit checks and adjusts the distance of 
each speaker from the listening position and 
adjusts the timing of each channel.

Size 
(Speaker size)

This unit checks and adjusts the frequency 
response of each speaker and sets the 
appropriate low-frequency crossover for 
each channel.

Equalizing 
(Speaker 
equalizing)

Parametric equalizer adjusts the level of the 
specified frequency bands. This unit 
automatically selects the crucial frequency 
bands for the listening room and adjusts the 
level of the selected frequency bands to 
create a cohesive sound field in the room.

Level 
(Speaker level)

This unit checks and adjusts the volume 
level of each speaker.

Once you perform the next operation, this unit starts the 
automatic setup procedure in 10 seconds. During the 
automatic setup procedure, do not perform any operation on 
this unit. For more accurate measurements, we recommended 
that you get out of the room or move to the wall where 
speakers are not around during the measurement. It takes 
approximately 3 minutes.