Yamaha RX-V3900 User Manual

Use this feature to optimize the setup of this unit for 
multiple listening positions. You can also select the 
parameters to be optimized by the automatic setup.

Place the optimizer microphone at the first 
listening position.
The following illustration shows how to place the 
optimizer microphone in order to optimize the setup 
of this unit for seven listening positions for example.

1/2/3/4/5/6/7: Listening positions

Press I

MENU on the remote control.

The GUI menu appears in the video monitor.

Press 9k to select “Setup Menu” and then 
press 9h.

Press 9k / n repeatedly to select “Multi 
Measure” and then press 9h.

Press 9k / n repeatedly to set the number of 
listening positions and press 9l.
Choices: 1 (default), 2, 3, 4, 5, 6, 7, 8

To select the parameters to be optimized, 
press 9k / n to select the parameter and 
then press 9

ENTER to check or uncheck 

the box.
When you do not need to select the parameters to be 
optimized, skip to step 8.

y

If you do not select the parameters to be optimized, this 
unit will optimize the parameters you selected last time. 
All the parameters are selected by the initial factory 
settings.

Press 9l to return to the previous menu 
level and then press 9n to select “Start”.

Press 9

ENTER to start the measurement.

This unit starts to count down from 10 seconds.

y

• To start the measurement immediately, press 9ENTER 

again.

• To cancel the automatic setup and return to the previous 

screen, press 0RETURN.

Loud test tones are output from each speaker during 
the measurement. Once all items for the first listening 
position are measured, the following message 
appears.

1

7

2

6

4

3

5

Once you perform the next operation, this unit starts the 
automatic setup procedure in 10 seconds. During the 
automatic setup procedure, do not perform any operation on 
this unit. For more accurate measurements, we recommended 
that you get out of the room or move to the wall where 
speakers are not around during the measurement.