Yamaha RX-V3900 User Manual

If an error or warning message appears, see “Error and 
warning messages” (page 32).

Move the optimizer microphone to the 
second listening position and then press 
9

ENTER to start the measurement.

y

To skip the measurements at the remaining listening 
positions, press 9n.

Repeat step 10 until the measurement at all 
listening positions are made.
If you have made the measurement at all listening 
positions or skipped the measurement at the 
remaining listening positions, “Measurement 
Completed Successful” appears.

Follow steps 7 to 9 in “Basic automatic 
setup” (page 31) to view the measurement 
results and turn off the GUI menu.

Use this feature to review the result of the automatic setup. 
You can also reload the automatic setup parameters in case 
you are not satisfied with the speaker setup and sound 
adjustments you have configured manually.

If you reload the automatic setup parameters, the settings you 
have configured manually are cleared. To save the settings 
before reloading the automatic setup parameters, see “System 
Memory” (page 101).

Set the operation mode selector to F

AMP 

and then press I

MENU.

The GUI menu appears in the video monitor.

y

If the menu directory other than “Top Menu” (page 79) is 
displayed, press and hold IMENU to display the top GUI 
menu.

Press 9k / n repeatedly to select “Setup” 
and then press 9h.

Press 9k / n repeatedly to select “Auto 
Setup” and then press 9h.

Press 9k to select “Information” and then 
press 9h.

Press 9k / n repeatedly to select the 
parameter of which you want to check the 
setting.