Yamaha RX-Z7 User Manual

Each speaker settings
Select whether this unit mutes each speaker channel when 
you set “Mode” to “Enable”.

Use this menu to adjust the video parameters.

y

You can reset the all parameters in “Video” to the initial factory 
settings by using “VIDEO” of “INITIALIZE” in “ADVANCED 
SETUP” (page 131).

■ Analog ` Analog 

Use this feature to enable or disable the video conversion 
among the analog video jacks (VIDEO, S VIDEO, and 
COMPONENT VIDEO jacks).

• Analog-to-HDMI video conversion is always possible unless 

video signals are being input at the HDMI input jacks or 1080p-
resolution analog video signals are being input.

• This unit does not convert 480 line video signals and 576 line 

video signals interchangeably.

• 480p-, 576p-, 1080i- and 720p-resolution video signals cannot 

be output at the S VIDEO and VIDEO MONITOR OUT jacks.

• The converted video signals are only output at the MONITOR 

OUT jacks. When recording a video source, you must make the 
same type of video connections between each component.

• When composite video or S-video signals from a VCR are 

converted into component video signals, the picture quality may 
suffer depending on your VCR.

• Unconventional signals input at the composite video or S-video 

jacks cannot be converted or may be output abnormally. In such 
cases, set “Analog ` Analog” to “Through”.

■ Analog ` HDMI (Analog-to-HDMI video 

Use this feature to select whether this unit processes the 
analog-to-HDMI video signals (input at VIDEO, 
S VIDEO, or COMPONENT VIDEO input jacks and 
output at HDMI OUT jacks).

■ HDMI ` HDMI 

Use this feature to select whether this unit processes the 
HDMI-to-HDMI video signals (input at HDMI input jacks 
and output at HDMI OUT jacks).

■ Processing 

Use this feature to configure the resolution, aspect, and 
progressive re-processing settings for the video signals 
output at the HDMI OUT jacks.

This feature is available only when “Analog ` HDMI” or 
“HDMI ` HDMI” is set to “Processing”.

Front L

Front left

Front R

Front right

Center

Center

Surround L

Surround left

Surround R

Surround right

Surround Back L

Surround back left

Surround Back R

Surround back right

Front Presence L

Front presence left speaker

Front Presence R

Front presence right speaker

Subwoofer

Subwoofer

Mute On

Mutes the selected speaker channel.

Does not mute the selected speaker channel.

Through

Disables the video conversion among the analog 
video jacks.

Enables the video conversion among the analog 
video jacks.

Select this setting when you do not want this 
unit to process the analog-to-HDMI video 
signals.

Processing

Select this setting when you want this unit to 
apply the video processing configured in 
“Processing” to the analog-to-HDMI video 
signals.

Select this setting when you do not want this 
unit to process the HDMI-to-HDMI video 
signals.

Processing

Select this setting when you want this unit to 
apply the video processing configured in 
“Processing” to the HDMI-to-HDMI video 
signals.