Sony STR-DN1010 User Manual

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm

STR-DN1010

4-174-068-11(1)

You can use the following parameters to adjust 
the tonal quality (bass/trebel level) of front 
speakers.

• This function does not work in the following cases.

– Sound Field is set to “Analog Direct”.
– Signals with a sampling frequency of more than 

48 kHz are being received.

• If the equalizer is adjusted while the receiver is 

receiving signals with a sampling frequency of 
more than 96 kHz, the signals will always be 
played back at 96 kHz.

Press 

B/b repeatedly to select “Bass” 

or “Treble”.

Press 

V/v repeatedly to adjust the gain, 

then press 

.

You can make settings for the audio to suit 
your preference.

Lets you delay the output of audio to minimize 
the time gap between audio output and visual 
display. You can adjust the delay from 0 ms to 
300 ms in 10 ms steps.

• This parameter is useful when you use a large LCD 

or plasma monitor or a projector.

• This function does not work in the following cases.

– Sound Field is set to “Analog Direct”.
– Signals with a sampling frequency of more than 

96 kHz are being received.

Lets you select the language you want to listen 
to during digital broadcast. This feature only 
functions for Dolby Digital sources.

x Main/Sub

Sound of the main language will be output 
through the front left speaker and sound of the 
sub language will be output through the front 
right speaker simultaneously.

x Main

Sound of the main language will be output.

x Sub

Sound of the sub language will be output.

Level 
(dB)

Bass

Treble

Frequency 
(Hz)