Sony STR-DN1010 User Manual

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm

STR-DN1010

4-174-068-11(1)

 

 

 

 

 

 

 

Lets you specify the input mode for the digital 
signal input to the DIGITAL IN jacks or 
HDMI IN jacks.

x AUTO

Automatically switches the input mode 
between DTS, Dolby Digital, or PCM.

x PCM

When signals from the DIGITAL IN jack are 
selected, PCM signals are given priority (to 
prevent interruption when playback starts). 
However, when other signals are input, there 
may be no sound, depending on the format.
In this case, set this item to “AUTO”.
When signals from the HDMI IN jack are 
selected, only PCM signals are output from the 
connected player. When signals other than 
PCM are received, set this item to “AUTO”.

• Even when “Dec. Priority” is set to “PCM”, the 

sound may be interrupted at the very beginning of 
the first track depending on the CD being played 
back.

• When playback a DTS CD, set “Dec. Priority” to 

“AUTO”.

You can make settings for video.

Lets you convert the resolution of analog video 
input signals (component video and video) and 
output from the HDMI TV OUT jack.

x AUTO

The resolution is set automatically, depending 
on the connected TV.

x 480/576p

The resolution is set to 480p/576p. Video 
signals are upconverted and output through the 
receiver.

x 720p

The resolution is set to 720p. Video signals are 
upconverted and output through the receiver.

x 1080i

The resolution is set to 1080i. Video signals 
are upconverted and output through the 
receiver.

x 1080p

The resolution is set to 1080p. Video signals 
are upconverted and output through the 
receiver.

If you select a resolution that the connected TV does 
not support in “Resolution” menu, the images from 
the TV will not be output correctly.