Sony STR-DN1010 User Manual

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm

STR-DN1010

4-174-068-11(1)

If the image is distorted when you connect to 
video game, set “Comp.Dec.” to “ON”. This 
setting is only applicable for component video 
input signals.

x ON

x OFF

You can make the required settings for 
components connected to the HDMI jack.

Lets you turn the Control for HDMI function 
on or off. For details, see “Preparing for the 
“BRAVIA” Sync” (page 70).

x ON

x OFF

When you set “Ctrl for HDMI” to “ON”, “Audio 
Out” may be changed automatically.

Lets you output the HDMI signals to the TV 
even when the receiver is in standby mode.

x ON

When the receiver is in the standby mode, the 
receiver continuously outputs HDMI signals 
from the receiver’s HDMI TV OUT jack.

x AUTO

When the TV is turned on while the receiver is 
in the standby mode, the receiver outputs 
HDMI signals from the receiver’s HDMI TV 
OUT jack. Sony recommends this setting if 
you use a TV that is compatible with 
“BRAVIA” Sync. This setting saves power in 
the standby mode compared with the “ON” 
setting.

x OFF

The receiver does not output HDMI signals 
when in the standby mode.
Turn on the receiver to enjoy the connected 
component’s source on the TV. This setting 
saves power in the standby mode compared 
with the “ON” setting.