ONKYO ABX-100 User Manual

En-

13

 (by remote controller only)—Continued

Use the []/[] buttons to specify the 
ABX-100’s volume level, and then press the 
[ENTER] button.
The timer symbol and number will appear in the 
upper right of the display; this display will 
disappear after a few seconds.

Tip:
• You can check the setting by pressing the [TIMER] 

button and then pressing [ENTER] repeatedly.

Use the []/[] buttons to select “Timer1 
Setup” or “Timer2 Setup”, and then press 
the [ENTER] button.

Use the []/[] buttons to select “On” or 
“Off”, and then press the [ENTER] button.

When timer playback is operating, the ABX-100 
provides a snooze feature that temporarily silences the 
song playback and sounds the song playback again after 
five minutes.

Enabling the snooze feature
When the timer has started song playback on the 
ABX-100, you can press the [SNOOZE] button to use 
the snooze feature.

After five minutes, the snooze feature sounds the song 
playback again.

With the sleep timer, you can set the ABX-100 so that it 
automatically turns off after a specified period.

With the [SLEEP] button, you can set the sleep time 
from 90 to 10 minutes in 10 minute steps.

When the sleep timer has been set, “Sleep 90” appears 
on the display. The sleep time appears on the display for 
about eight seconds, then the sleep time display 
disappears.

The display will indicate [SLEEP] while the sleep timer 
is operating.

To check the remaining sleep time, press the [SLEEP] 
button.

Note that if you press the [SLEEP] button while the sleep 
time is being displayed, you’ll shorten the sleep time by 
10 minutes.

To cancel the sleep timer, press the [SLEEP] button 
repeatedly until “Sleep Off” appears.

Clock Setup

   12:12

   Friday

1