ONKYO ABX-100 User Manual
En-
14
Other Settings
(Reset Procedure)
When the ABX-100 is in Standby mode, pressing the
remote’s [MENU] button will display the following items.
remote’s [MENU] button will display the following items.
The available settings for each item are shown below.
(The default setting is underlined.)
(The default setting is underlined.)
“12/24H Format” 12H
24H
Switches the time format between
12-hour and 24-hour. On models for
the North American market, the
default setting is “12H”; for other
models, the default setting is “24H.”
12-hour and 24-hour. On models for
the North American market, the
default setting is “12H”; for other
models, the default setting is “24H.”
“Beep”
On
Off
Switches on/off the beep tone that
sounds when you press a button on
the top panel of the ABX-100.
sounds when you press a button on
the top panel of the ABX-100.
“Volume Limit”
10
40
Specifies the maximum volume in
the range of 10–40. The default
setting is 40.
the range of 10–40. The default
setting is 40.
“Reset”
Cancel
OK
If you select OK and then press the
[ENTER] button, the ABX-100 will be
reset to its factory-set state.
[ENTER] button, the ABX-100 will be
reset to its factory-set state.
1
Use the []/[] buttons to select a menu
item, and then press the [ENTER] button.
item, and then press the [ENTER] button.
2
Use the []/[] buttons to change the
setting.
setting.
3
Press the [ENTER] button to finalize the
change, and exit the menu.
change, and exit the menu.
Note:
• During this procedure, you can press the [MENU]
• During this procedure, you can press the [MENU]
button to exit the settings.
Troubleshooting
If you experience any problem while using the
ABX-100, look for a solution in this section.
ABX-100, look for a solution in this section.
Can’t turn on the ABX-100.
• Make sure that the AC adapter is properly plugged
into the wall outlet, and that the DC IN connection has
been made correctly (see page 7).
been made correctly (see page 7).
• Unplug the AC adapter from the wall outlet, wait 10
seconds or more, then plug it in again.
The ABX-100 turns off unexpectedly.
• If the sleep timer has been set and the SLEEP indicator
is shown on the display, the ABX-100 will turn off
automatically after a specified period (see page 13).
automatically after a specified period (see page 13).
• When timed playback finishes, the ABX-100
automatically switches to Standby mode (see
page 12).
page 12).
There’s no sound.
• Make sure the ABX-100’s volume is not set too low
• Make sure the correct input source is selected (see
• Make sure the ABX-100 is not muted (see page 8).
• Check all connections and correct as necessary (see
• Check all connections and correct as necessary (see
The sound quality is not good.
• The sound quality can be affected by strong magnetic
fields, such as that from a TV. Try moving any such
devices away from the ABX-100.
devices away from the ABX-100.
• If you have any devices that emit high-intensity radio
waves near the ABX-100, such as a cellular phone
that’s being used to make a call, the ABX-100 may
output noise.
that’s being used to make a call, the ABX-100 may
output noise.
Audio output is intermittent when the
ABX-100 is subjected to vibration.
ABX-100 is subjected to vibration.
The ABX-100 is not a portable device. Use it in a
location that’s not subject to shock or vibration.
location that’s not subject to shock or vibration.
12/24H Format
Beep
Volume Limit
Reset
Reset
Power
If you can’t resolve the issue yourself, try resetting
the ABX-100 before contacting your Onkyo dealer.
the ABX-100 before contacting your Onkyo dealer.
Reset the ABX-100 as described in the “Reset”
section of “Other Settings” (this page).
section of “Other Settings” (this page).
Note that resetting the ABX-100 will delete your
custom settings.
custom settings.
Audio